
In short: A batch manufacturing record (BMR) is the full history of one batch: the raw material lots that went in, every process step with dates and names, in-process checks, the yield, packing, QC results and release. Schedule T expects one for every batch of an Ayurvedic medicine. A good BMR is filled in as the batch is made, follows the master formula, and links back to raw material lots and forward to the invoices the batch was sold on.
When an inspector visits an Ayurvedic pharmacy unit, or a distributor reports a problem with a bottle, the first question is the same: show me the record for this batch. If that record was written up from memory a week later, or the raw material lot numbers are missing, there is no good answer.
This guide covers what an Ayurvedic BMR should contain, a filled sample, the extra details each dosage form needs, and the mistakes that make batch records fail when they are needed most.
Two documents are often confused:
The BMR should always name the master formula version it was made from. If the formula is revised, older batches still point to the version they followed.
| Section | What to record | Who fills it |
|---|---|---|
| 1. Batch header | Product name, batch number, batch size, master formula reference, date of manufacture, expiry date | Production in-charge |
| 2. Raw material issue | Each ingredient, quantity required, quantity issued, raw material lot number, QC release status of the lot | Store, checked by production |
| 3. Process steps | Each step in order with date, start and end time, equipment used, operator and observations | Operator, checked by supervisor |
| 4. In-process checks | Checks done during manufacture, such as mesh size, moisture, weight variation or paka stage, with results | Production / QC |
| 5. Yield | Theoretical yield, actual yield, percentage, and the reason if outside the expected range | Production in-charge |
| 6. Packing | Packing material lots, pack size, number of packs, label check, batch and expiry printed correctly, reconciliation of labels | Packing supervisor |
| 7. QC and release | Finished product test results, QC approval, date of transfer to the finished goods store | QC in-charge |
| 8. Deviations and sign-off | Anything that did not go as written, what was done, and the final signatures | Production and QC heads |
Every entry should carry a date and the name or signature of the person who made it. A step without a name is a step nobody can be asked about.
The figures below are illustrative. Use the quantities, mesh size and limits from your own approved master formula.
Batch header: Triphala Churna · Batch no. TC-2611-07 · Batch size 50 kg · Master formula MF-TC v2 · Manufactured 14 Nov 2026 · Expiry as per the shelf life applicable to churna
Raw material issue
| Ingredient | Required | Issued | RM lot | Lot QC status |
|---|---|---|---|---|
| Haritaki (Terminalia chebula) fruit rind | 16.67 kg | 16.70 kg | RM-HAR-0412 | Approved |
| Bibhitaki (Terminalia bellirica) fruit rind | 16.67 kg | 16.70 kg | RM-BIB-0398 | Approved |
| Amalaki (Phyllanthus emblica) fruit pulp | 16.67 kg | 16.70 kg | RM-AML-0425 | Approved |
Process steps
| Step | Date | Observation | Done by |
|---|---|---|---|
| Cleaning and sorting | 11 Nov | Foreign matter removed: 0.3 kg | R. Patel |
| Drying | 11–12 Nov | Dried at controlled temperature to constant weight | R. Patel |
| Pulverising | 13 Nov | Each ingredient powdered separately | S. Desai |
| Sieving | 13 Nov | Passed through the mesh size in the master formula | S. Desai |
| Mixing | 14 Nov | Mixed for the time in the master formula; uniform colour | S. Desai |
| Sample to QC | 14 Nov | In-process sample drawn for testing | QC: M. Shah |
Yield: theoretical 50 kg · actual 47.5 kg · 95% (expected range in master formula: 93–97%) · within range
Packing: 100 g HDPE jars · 450 jars packed (45 kg) · 2.5 kg retained for QC testing and reserve samples · 460 labels issued, 450 used, 10 destroyed and recorded
QC and release: finished product tested against the specification; approved by QC on 16 Nov; transferred to the finished goods store on 16 Nov
The eight sections are the same for every product. What changes is the process detail, and that is where most batch records are thin.
| Dosage form | Record in addition |
|---|---|
| Churna | Mesh size, moisture content, mixing time, uniformity |
| Vati / Gutika | Bhavana (trituration) liquid and duration, granule moisture, tablet or pill weight, weight variation, hardness and disintegration where tested |
| Kashaya / Kwatha | Ratio of drug to water, volume before and after reduction, filtration, preservative if used, fill volume |
| Asava / Arishta | Date fermentation started and ended, vessel, daily or periodic observations, end-point check, filtration and settling, alcohol content as tested |
| Taila / Ghrita | Kalka, kwatha and sneha quantities, number of days of paka, paka stage reached (mridu, madhyama or khara) as the formula requires, end-point tests, filtration |
| Avaleha | Sugar or jaggery syrup stage, temperature and time of cooking, addition sequence of prakshepa dravyas, end-point tests |
| Bhasma | Shodhana method and media, number of putas, temperature or type of puta, bhasma pariksha (tests) after each stage |
Long processes need extra care. An asava may sit in its vessel for weeks, and a bhasma may go through many putas. Record each stage as it happens, with its own date and name. A single entry at the end saying "process completed" is not a record of the process.
Percentage yield = actual output ÷ theoretical output × 100
Yield is the quickest warning sign in a batch record. A churna batch that normally gives 95% and suddenly gives 88% means something happened: wet raw material, loss in the pulveriser, a sieve problem, or an error in issue. Set an expected range in each master formula, record the actual yield on every batch, and investigate any batch outside the range before QC releases it. Looking at yield across batches also shows which products or machines lose the most material.
Ayumanager PRO calculates each batch's raw material requirement from the formulation master, issues stock lot-wise, records every process step and the yield, holds the batch until QC approval, and links it to the invoices it was sold on.
A BMR is only useful in a complaint or recall if it connects in both directions:
If raw material is issued as "Haritaki, 16.7 kg" without a lot number, the backward link is broken. If invoices don't carry batch numbers, the forward link is broken. Either way, a problem with one supplier's lot turns into a recall of every batch made that month.
Accounts for manufacturers are set up by our team after a requirement call. Read more on our Ayurveda manufacturing software page.
What is a batch manufacturing record (BMR)?
A batch manufacturing record is the complete written history of one batch of a medicine: which raw material lots were used and in what quantity, each process step with dates and the person responsible, in-process checks, the yield, QC results, packing details and the release of the batch to the finished goods store.
Is a BMR required for Ayurvedic medicines?
Yes. Licensed manufacturers of Ayurvedic, Siddha and Unani medicines in India are required to follow Good Manufacturing Practices under Schedule T of the Drugs and Cosmetics Rules, 1945, and Schedule T expects a batch manufacturing record to be maintained for every batch. Check the current text of Schedule T and any directions from your State Licensing Authority for the exact requirements that apply to your unit.
What is the difference between a master formula and a BMR?
The master formula (or master formula record) is the approved recipe for a product: ingredients and quantities for a standard batch size, the process and the expected yield. It does not change from batch to batch. The BMR is the record of what actually happened in one batch made from that master formula, including the actual quantities, lots, dates, people and yield.
How is yield calculated in a BMR?
Percentage yield is the actual output divided by the theoretical output, multiplied by 100. If a 50 kg batch of churna gives 47.5 kg of sieved powder, the yield is 47.5 ÷ 50 × 100 = 95%. The master formula should state the acceptable yield range, and any batch outside that range should be investigated before release.
How long should batch records be kept?
Keep batch records at least until the expiry of the batch and for a reasonable period after it, in line with Schedule T and your State Licensing Authority. Many manufacturers keep them for several years after expiry so that complaints and recalls can always be traced.
Can a BMR be maintained in software instead of on paper?
Yes, provided the electronic record is complete, every entry shows who made it and when, approved records cannot be changed without a trace, and the record can be produced and printed for inspection. Software also links the BMR to raw material stock, QC results and invoices, which a paper register cannot do.
Tell us your products, batch sizes and departments — we'll show you raw material stock, batch records, QC release and GST invoicing, then create your account for your unit.